One of the most challenging tasks in the stifling summer heat is cooling a tent. It’s not surprising that many of us are considering the possibility of purchasing a tent air conditioner to cool a tent.
But how profitable is it as an investment? Does it actually work? What are the top portable air conditioners for camping? Well, in this article you will get the answers to all your questions.
Types of tent air conditioners
- Evaporative coolers
- Portable air conditioners
- Window air conditioners
The least expensive alternative is an evaporative cooler, which you can get for no more than $50. Or you can look into this evaporative cooler by Arctic air. However, don’t expect them to work miracles and use them carefully inside a tent as the water vapors must escape somewhere or the tent will become a greenhouse.
Steps to install an evaporative cooler:
1. Installation of the support assembly
This is the first and most fundamental step in installing your cooling system. Generally, the support component comes with the evaporative cooler from the manufacturer. Place the support assembly in the proper location. In order to position the device correctly, project the window outward.
2. Cooler placement on the assembly
The cooler must be set up once the support assembly has been installed. Place the cooler on the support assembly, which is fully supporting the unit. Be sure to secure the wall hangers and brackets to the unit.
3. Connect the water line
Now it’s time to attach the cooler’s water line. Make sure the cut-off valve is fitted between the cooler and the water as well. Cut-off valves are essential because they aid in emptying water from the unit, protecting the entire system from harm.
4. Installation of the Air Vent
The Air Vent Cover that is included in the kit has to be attached. It draws cool air inside, keeping your house cozy and cool.
Portable air conditioner
Portable air conditioners are an improvement over the evaporative coolers mentioned above and can be used during tent camping because most of them are light enough to be carried around. This portable air conditioner by Serenelife is a pretty good investment if you often go tent camping in the summer.
If you have access to power, the less expensive corded version will function just as well. There are portable devices that can run on batteries.
Steps to install a portable AC:
1. Pick the right spot
For optimum ventilation, your portable AC needs a few feet of clear floor space. Additionally, you need to have convenient access to the water reservoir. Placing your portable air conditioner closer to the window will allow it to operate more efficiently. By doing this, more warm air will be able to escape outside rather than return to space.
2. Adjusting the adapter kit
The window adapter kit should establish a good seal. Contrary, if the window is too small, the window adapter may need to be adjusted. If the window is too big, you might need to buy some plexiglass to fill the gap.
3. Setting up the adapter kit
Put the adapter kit in the window once you’ve identified it fits the window’s measurements. It might need to be secured with screws. You might also opt to use duct tape to seal it. By doing this, your cold air will not leak around the edges.
4. Attach the ventilation hose
First, connect your hose to the window adapter kit. Make certain it fits snugly. Wrap a layer of duct tape over the connecting point if it’s a bit floppy. The portable air conditioner should then be connected to the ventilation hose’s opposite end. If necessary, use duct tape.
5. Connect the drain hose
If your portable air conditioner has a drainage hose for continuous drainage, you should secure it to the drainage point on the unit and attach it to it. Secure the hose with tape whether it is draining in a sink, tub, or bucket to prevent it from becoming loose and dripping on the floor.
6. Connect the portable air conditioner to the outlet
When everything is connected, you may switch on your portable AC by plugging it in.
Window air conditioners:
Camping enthusiasts discovered that the most affordable and potent air conditioners that can be adapted to be used inside a tent are window-mounted air conditioners because of their small size. A good option for a compact window AC is this GE window air conditioner as it is ideal for small spaces.
Some units are tiny enough to be transported (often even smaller than the portable substitutes) and the fact that they don’t require a ton of accessories to function makes them a very dependable choice.
Steps to install a window AC unit:
1. Setting up a tent
Pitching your tent provides you with an idea of where your window AC will be installed.
Next, measure and record the dimensions of the heat exchanger.
2. AC window placement
The next stage is to figure out where you want your window AC to be.
It’s a vital step in keeping your tent cold so that the window AC doesn’t blow straight on your face and head. You may put it anywhere you like but not directly on your face or head. It’s harmful.
3. Disconnecting the AC Port
The cutting comes next and it doesn’t get any more precise than this.
Remember, you only get one shot and there’s no turning back.
A tiny hole will not allow your AC to function and a larger opening will allow cold air to depart while allowing hot air to enter.
Use the previous measurement and take your time.
The tent fabric must be wrapped around the tent in the final stage.
To stop heat transfer and create a tight fit, wrap some cloth with adhesive around the AC port. To seam the edges, use duct tape.
It also prevents tent fabric from fraying.
It is necessary to understand how to install an AC in the tent port since AC has become a staple of summer camping. We’ve gone through all of the processes for installing an air conditioner so you don’t have to worry the next time you go camping in the summer.